My fellow short-statured friends, this one is for you! I'm sure you can relate to the struggle of finding an office chair (or any chair for that matter) where you can scoot all the way back and have your feet touch the ground. At 5'2" (5"3" on a good day) I'm either leaning forward with zero back support or sitting back with my feet dangling in mid-air. Not good when you're spending so much time on the computer.
Lowering the chair isn't an option either because the desk is way too high to comfortably type. So I came up with a budget-friendly alternative by making an office chair bolster pillow with farmhouse charm and my back is thanking me!
This handy bolster pillow scoots me forward on the seat while providing much needed back support AND my feet touch the floor. Prior to making it, I was using a pillow that I slipped behind my back and was such a nuisance. It was constantly shifting and every time I stood up it would fall to the floor. Plus it was kind of embarrassing because it was just a pillow form without a cover and our guest bathroom has a direct sightline to my office.
The bolster pillow attaches to the chair with ties wrapped around the headrest and can be adjusted as needed.
I made the bolster pillow with a red ticking stripe remnant from an armchair slipcover that I've been itching to put to good use. Some of the slipcover fabric was used to make these Farmhouse Ticking Stripe Pumpkins and to upholster this IKEA Bentwood Stool.
This office chair bolster is for a novice sewing skill level. Instead of a more difficult zipper closure, it is an envelope style pillow cover.
The pillow front fabric is cut 20" x 20".
I was thrilled to find a long piece of the slipcover with a finished seam that I could use for the two back pieces of the pillow cover. With envelope style pillows you want the back two pieces to overlap one another by at least four inches. My readymade option is 14-inches long which provides a four-inch overlap on both pieces. I cut it into two 20-inch wide pieces (pictured below).
I'll be using the salvaged tie back pictured below to hang the bolster pillow around the headrest of my office chair. Saved me a lot of time not having to sew new tie backs.
Sew the 4-inch strips together as pictured below. Ticking stripe fabric is prone to fraying so I used the elastic stretch stitch on my sewing machine to stop the edges from fraying. A serging or zig zag stitch is another option.
Once you have your 160-inch long ruffle sewn, fold it in half and iron the fold. My ironing board and iron are kept in the basement laundry room so I have a small tabletop ironing board and travel steam iron in my office to use for sewing projects. Excuse the stains on the ironing board cover, time to make a new one.
Iron any wrinkles out of the front and back pieces of the pillow cover at this point as well.
This step is tedious and a little finicky so you will want to take your time. It's a good step to do while watching television.
Measure the ruffle every 40-inches (double the width of each side of the pillow form) and mark with a pin.
Starting at one end, with needle and thread run a basting stitch (pictured below) the first up to the first 40-inch mark. Make sure to leave long thread strands on each end for pulling. It's important that there not be any knots in the fabric so it gathers easily.
Slowly and carefully pull the thread on either end to gather the fabric until it measures 20-inches (the length of one side of the pillow) for a double ruffle (pictured below). Tie the threads so they don't unravel. Gather the next 40-inches of fabric much the same. Continue these steps until you have an 81-inch long ruffle - an extra inch for 1/2-inch seam allowance.
Sew the two ends of the ruffle together (make sure the ruffle isn't twisted), much like you did when making the long ruffle strip.
Pin the raw edges of the ruffle to the raw edge of the pillow front piece. With the stitch length set to #4 (longest stitch on the sewing machine), baste stitch the ruffle with a 1/2-inch seam allowance, pivoting the needle at the corners.
Now we have the front ruffle finished we'll work on the two back pieces for an envelope closure. You can see in the photo below that I didn't take my own advice and iron the piece first while making the ruffle.
Turn the pillow cover right side out, pushing the corners with the end of a wooden spoon. Slip the pillow form inside one half of the cover (pictured below).
And fold the other half of the pillow cover over the pillow form and you're ready to hang it on the chair.
Adjust the height of the pillow to your liking and tie it around the headrest of the office chair.
I am so glad to FINALLY have the back support that I need while scooting forward in my office chair so my feet touch the ground. No more loose pillows constantly shifting and falling to the ground and it looks lovely with its farmhouse charm.
If you have any questions about this project, please leave them in the comment section below or press the Contact Me button at the top of the blog to drop me an email. I love hearing from you!
For more DIY pillow inspiration and tutorials see my Pearl Earring Envelope Pillow Cover or Turquoise Rosette Drop Cloth Pillow posts.
I share my projects at these inspiring link parties.
Lowering the chair isn't an option either because the desk is way too high to comfortably type. So I came up with a budget-friendly alternative by making an office chair bolster pillow with farmhouse charm and my back is thanking me!
Office Chair Bolster Pillow For Us Short-Statured Folks
This handy bolster pillow scoots me forward on the seat while providing much needed back support AND my feet touch the floor. Prior to making it, I was using a pillow that I slipped behind my back and was such a nuisance. It was constantly shifting and every time I stood up it would fall to the floor. Plus it was kind of embarrassing because it was just a pillow form without a cover and our guest bathroom has a direct sightline to my office.
The bolster pillow attaches to the chair with ties wrapped around the headrest and can be adjusted as needed.
I made the bolster pillow with a red ticking stripe remnant from an armchair slipcover that I've been itching to put to good use. Some of the slipcover fabric was used to make these Farmhouse Ticking Stripe Pumpkins and to upholster this IKEA Bentwood Stool.
This office chair bolster is for a novice sewing skill level. Instead of a more difficult zipper closure, it is an envelope style pillow cover.
Here's how I made it...
Cutting the fabric
The measurements are based on a 20-inch pillow form, adjust your measurements according to your pillow form size.Tip 1:
For a fuller pillow cut the fabric the same size as the pillow form without an allotment for a seam allowance.Tip 2:
When salvaging a slipcover try to incorporate the parts with finished seams and recycle the tie backs too. The less sewing involved the better.The pillow front fabric is cut 20" x 20".
I was thrilled to find a long piece of the slipcover with a finished seam that I could use for the two back pieces of the pillow cover. With envelope style pillows you want the back two pieces to overlap one another by at least four inches. My readymade option is 14-inches long which provides a four-inch overlap on both pieces. I cut it into two 20-inch wide pieces (pictured below).
I'll be using the salvaged tie back pictured below to hang the bolster pillow around the headrest of my office chair. Saved me a lot of time not having to sew new tie backs.
Making the bolster pillow ruffle
Cut long strips of fabric (make sure the pattern is the same direction) into 4-inch wide strips. You will need enough to make a 160-inch long strip plus an extra 10-inches for seam allowances.Sew the 4-inch strips together as pictured below. Ticking stripe fabric is prone to fraying so I used the elastic stretch stitch on my sewing machine to stop the edges from fraying. A serging or zig zag stitch is another option.
Once you have your 160-inch long ruffle sewn, fold it in half and iron the fold. My ironing board and iron are kept in the basement laundry room so I have a small tabletop ironing board and travel steam iron in my office to use for sewing projects. Excuse the stains on the ironing board cover, time to make a new one.
Iron any wrinkles out of the front and back pieces of the pillow cover at this point as well.
This step is tedious and a little finicky so you will want to take your time. It's a good step to do while watching television.
Measure the ruffle every 40-inches (double the width of each side of the pillow form) and mark with a pin.
Starting at one end, with needle and thread run a basting stitch (pictured below) the first up to the first 40-inch mark. Make sure to leave long thread strands on each end for pulling. It's important that there not be any knots in the fabric so it gathers easily.
Slowly and carefully pull the thread on either end to gather the fabric until it measures 20-inches (the length of one side of the pillow) for a double ruffle (pictured below). Tie the threads so they don't unravel. Gather the next 40-inches of fabric much the same. Continue these steps until you have an 81-inch long ruffle - an extra inch for 1/2-inch seam allowance.
Sew the two ends of the ruffle together (make sure the ruffle isn't twisted), much like you did when making the long ruffle strip.
Attaching the ruffle
There are two ways to attach the ruffle to the pillow cover. If you're an experienced sewer, you can skip this step and move onto assembling the pillow cover. But in this tutorial, we're going to take the easier route of sewing the ruffle onto the front piece first.Pin the raw edges of the ruffle to the raw edge of the pillow front piece. With the stitch length set to #4 (longest stitch on the sewing machine), baste stitch the ruffle with a 1/2-inch seam allowance, pivoting the needle at the corners.
Tip - How to sew corners
Stop near the edge and leave the same distance between the needle and the edge of the fabric (1/2-inch seam allowance). Put the needle in the down position, lift the pressure foot, pivot the fabric 90 degrees, and continue sewing. Double check that the ruffles on both sides of the corner are still facing towards the center of the pillow cover.Now we have the front ruffle finished we'll work on the two back pieces for an envelope closure. You can see in the photo below that I didn't take my own advice and iron the piece first while making the ruffle.
Assembling the envelope pillow cover
- Lay the front piece with the right side facing up and the ruffles pointing inwards toward the center of the pillow.
- Lay the ties pointing inward toward the center of the pillow and spaced approximately 6-inches from each corner. You want them hanging on each side of the headrest on the office chair.
- Lay one of the back pieces with the good side facing down and the finished seam towards the center of the cover. Pin the raw edges together.
- Lay the second piece over the previous one, again with the finished seam towards the center, and pin the raw edges together.
- Sew a 5/8-inch seam allowance around the entire pillow, pivoting the needle at the corners. Take your time as there will be a lot of bulk and make sure the ruffles are laying flat towards the center, especially around the corners.
Turn the pillow cover right side out, pushing the corners with the end of a wooden spoon. Slip the pillow form inside one half of the cover (pictured below).
And fold the other half of the pillow cover over the pillow form and you're ready to hang it on the chair.
Adjust the height of the pillow to your liking and tie it around the headrest of the office chair.
I am so glad to FINALLY have the back support that I need while scooting forward in my office chair so my feet touch the ground. No more loose pillows constantly shifting and falling to the ground and it looks lovely with its farmhouse charm.
If you have any questions about this project, please leave them in the comment section below or press the Contact Me button at the top of the blog to drop me an email. I love hearing from you!
For more DIY pillow inspiration and tutorials see my Pearl Earring Envelope Pillow Cover or Turquoise Rosette Drop Cloth Pillow posts.
I share my projects at these inspiring link parties.
First, let's take a look at what you may have missed from your party hosts!
DIY Air Plant String Art
